How to Properly Wash an Ergobaby 360 Baby Carrier

The Ergobaby 360 is one of the most popular soft structured baby carriers on the market. As a parent, you likely use your Ergobaby 360 frequently to carry and bond with your baby. With all that use, it’s important to know how to properly wash the Ergobaby 360 to keep it clean and hygienic for your child. This comprehensive guide will provide parents and caregivers with step-by-step instructions and tips for washing an Ergobaby 360 baby carrier.

Key Takeaways

  • Only use a mild detergent without bleach, fabric softeners or dryer sheets when washing the Ergobaby 360 to avoid damage.
  • Always wash the Ergobaby 360 carrier before first use to remove any residual chemicals from manufacturing.
  • Spot clean messes right away to prevent stains from setting in.
  • Machine wash the waistbelt, shoulder straps and body panel on a gentle cycle using cold water.
  • Tumble dry on low heat and remove promptly to prevent overdrying.
  • Wash the infant insert separately from the carrier.
  • Inspect for wear after washing and replace parts as needed.
  • Allow all components to fully air dry before reassembling for use.

Preparing the Carrier for Washing

Before tossing your Ergobaby 360 into the washing machine, there are a few key steps you’ll want to take first to protect the materials:

Disassemble the Carrier

  • Unbuckle all straps and completely detach the waistbelt, shoulder straps and body panel from one another. This prevents tangling and allows each piece to get thoroughly cleaned.

Close All Fasteners

  • Close any plastic buckles, clasps, buttons or velcro so these fasteners don’t get caught on other items in the wash.

Turn the Carrier Inside Out

  • Flip the waistbelt, shoulder straps and body panel inside out prior to washing. This exposes the inner layers most in contact with your baby’s skin to cleaning.

Remove Inserts and Accessories

  • Take out any inserts or other accessories like hoods, teething pads or nursing pillows and set aside to be washed separately as needed.

Once the carrier is prepped, you’re ready to wash it.

Washing the Carrier in a Machine

A standard washing machine is ideal for thoroughly cleaning all components of the Ergobaby 360. Follow these instructions for the best results:

Use a Gentle Cycle

  • Wash the carrier on a gentle or delicate cycle to avoid damage from agitation. The cool/cold temperature setting is also preferred.

Wash Separately

  • Wash the Ergobaby 360 by itself or with only baby items of similar colors to prevent picking up dye from other fabrics.

Skip the Fabric Softener

  • Do not use any fabric softener, it can cause buildup on the carrier that attracts dirt over time.

Use a Mild Detergent

  • Opt for a mild, hypoallergenic liquid detergent without added bleach, dyes or perfumes which could irritate baby’s skin.

Allow Extra Rinse Cycles

  • Additional rinse cycles help remove all traces of detergent that could also irritate sensitive skin.

Air Dry Only

  • Line dry or lay flat to air dry only. Avoid machine drying which can cause premature breakdown of the fabric.

Hand Washing the Carrier

While the washing machine is preferred for a deep clean, the Ergobaby 360 can also be effectively hand washed when needed.

Fill Sink/Basin with Cool Water

  • Use lukewarm water and a very mild detergent. Do not use hot water which can fade colors.

Gently Agitate and Scrub

  • Lightly swish and squeeze each component, focusing on areas that need extra cleaning. Use a soft brush for stubborn spots.

Rinse Thoroughly

  • Drain wash water and continue rinsing until all suds are removed. This prevents detergent residue from remaining.

Lay Flat to Air Dry

  • Do not wring excess water out. Simply lay each piece flat on a clean towel to air dry completely before reassembling.

Cleaning the Infant Insert

The Ergobaby 360 Infant Insert allows you to safely carry newborns and infants in an ergonomic position. Since it’s in direct contact with your baby’s skin, it’s vital to keep this insert clean by washing it separately from the carrier.

Check the Insert’s Tags

  • Review the specific washing instructions on the insert’s tags as they may differ slightly from the main carrier.

Machine Wash and Dry

  • The insert can typically be machine washed warm on a delicate cycle and tumble dried on low just like the carrier.

Wash Weekly

  • Wash the infant insert before first use and then weekly thereafter, or immediately if heavily soiled to prevent buildup.

Inspect Frequently

  • Check the insert for signs of wear each time you wash and replace if needed for safety.

Drying the Carrier After Washing

Proper drying is key to maintaining your Ergobaby 360’s quality and extend its lifespan.

Air Dry Thoroughly

  • Lay each component flat or hang dry. Do not place near direct heat sources.

Reshape While Damp

  • Gently smooth and adjust straps and panels to keep their form as they dry.

Use a Low Heat Dryer

  • If machine drying, only use the low heat setting and remove immediately when done to prevent overdrying.

Check for Dampness

  • Confirm each piece is completely dry before reassembling. Any remaining moisture can allow mold or mildew to develop.

Dry Metal Elements

  • Use a clean cloth to dry buckles, rings and other hardware to prevent water spots.

Reassembling After Washing

Once all parts of your Ergobaby 360 are fully dry, you can put it back together again.

Inspect for Damage

  • Check for loose threads, cracks or other wear before reusing. Replace any damaged elements for safety.

Follow Directions

  • Refer to the manufacturer’s instructions for properly rethreading straps and reattaching fasteners in the right configuration for baby wearing.

Test on Yourself First

  • Put the carrier on yourself without baby to ensure all buckles, straps and adjustments are secure.

Store Properly

  • Keep the carrier in a clean, dry place out of direct sunlight when not in use.

Handling Specific Stains, Spills and Odors

Despite your best efforts, stains, spills and odors still happen! Here are some handy tips for handling common cleaning challenges with the Ergobaby 360:

Spot Clean Immediately

  • Promptly rinse out wet messes with cool water to prevent stains from setting. Use a small amount of mild detergent and soft brush on set-in stains before washing.

Treat Pet Hair

  • Use a lint brush or piece of masking tape to remove pet hair between washes.

Remove Drool Stains

  • Dab with a sponge and baking soda/water solution. Rinse and launder as usual.

Eliminate Odors

  • Add 1/2 cup baking soda to wash water to freshen a smelly carrier. Allow extra rinse cycles.

Disinfect for Diarrhea

  • If exposed to diarrhea, wash normally with hot water and 1/2 cup bleach added to kill germs. Rinse thoroughly.

Scrub Blowout Stains

  • Use an oxygen-based stain remover specifically designed for baby messes before washing as normal.

Clean Up Spit Up or Milk

  • Pretreat with an enzymatic cleaner designed to break down organic stains and proteins.

Maintaining and Replacing Parts

With frequent washing and regular use, components of the Ergobaby 360 will show normal wear and tear over time.

Inspect Before Each Use

  • Check for stretched out straps, cracked plastic, damaged buckles or fabric tears that could impact safety.

Discontinue Use if Unsafe

  • Do not use a damaged carrier. Replace any parts that could fail or compromise baby’s secure fit.

Purchase Replacement Parts

  • Many elements like buckles, sleeping hoods, body panels, infant inserts and tooth pads can easily be replaced through the manufacturer.

Retire Old Carriers

  • If the full carrier is too worn out to be safely repaired, properly dispose and replace it with a new one.

Contact Ergobaby

  • Reach out to their customer service with any questions or concerns about your carrier’s condition and to order replacement parts.

Best Practices to Keep Your Carrier Clean

You can prevent your Ergobaby 360 from getting overly dirty between washes by following these handy hygiene habits:

  • Always have baby wear a clean, dry bib to absorb drool and protect the carrier.
  • Place a muslin cloth between baby and the carrier for an extra absorbent layer and do a “dry clean” by changing it out as needed.
  • Wash frequently used infant inserts and teething pads separately so they don’t soil the main carrier as quickly.
  • Spot clean messes right away with cool water and mild soap to avoid deep setting of stains.
  • Only use the carrier for babywearing purposes, not as a car seat cover, stroller canopy, picnic blanket or anything else that could dirty it.
  • Store in a clean, dry place like a coat closet rather than on the floor where it can attract dust and dirt.
  • When eating out, sit baby in a high chair with a bib rather than in the carrier where food can spill on it.
  • At home, feed baby over a plastic splat mat on the floor rather than babywearing during messy meals.
  • Allow the carrier to get some air and sun regularly which also naturally sanitize.


Washing and drying your Ergobaby 360 baby carrier properly is essential to keep your baby clean, comfortable and safe during wearing. By following this comprehensive guide, you’ll be able to effectively clean all components, treat tough stains, monitor for replacement and implement hygienic habits between washes. With the right care, your Ergobaby 360 can support babywearing adventures from newborn through toddlerhood.